Steel Pipe Bends Supplier – 3D, 5D & Induction Bends
Steel pipe bends in 3D, 5D, 6D to 10D or custom radius, hot induction or cold bent, 1/2 to 48 inch, in carbon steel, 304/316 stainless, API 5L line pipe and P11, P22 and P91 alloy steel.
Standard: ASME B16.9
Carbon Steel Concentric Reducer
Carbon steel concentric reducers for butt-weld piping, ordered to ASTM A234 (typically WPB / WPC; alloy WP grades when specified) with end-to-end length H from ASME B16.9. The cone keeps a common centreline between the large and small ends. Need stainless instead? See the sibling page stainless steel concentric reducer (A403). For concentric vs eccentric … Read more
Stainless Steel Concentric Reducer
Stainless steel concentric reducers for butt-weld piping, ordered to ASTM A403 (WP304 / WP304L / WP316 / WP316L and related WP grades) with end-to-end length H from ASME B16.9. The cone keeps a common centreline between the large and small ends. Eccentric stainless reducers (flat side) are available on the same PO when the layout … Read more
Lap Joint Flange
Lap joint flanges to ASME B16.5 used with ASME B16.9 stub ends – the flange is free to rotate for bolt hole alignment and only the stub end touches the fluid.
Alloy Steel Fittings
Chrome-moly alloy steel butt weld fittings to ASTM A234 in WP5, WP9, WP11, WP12, WP22 and WP91 for high temperature and hydrogen service.
Stainless Steel Butt Weld Fittings
Stainless steel butt weld elbows, tees, reducers and caps to ASTM A403 and ASME B16.9 in WP304, WP316, WP321, WP347 and duplex grades.
Weld On Pipe Caps – Dimensions & Supplier
Butt weld caps to ASME B16.9 in carbon steel, alloy steel and stainless steel, from 1/2 inch to 48 inch, for closing pipe ends permanently or temporarily.
Butt-Weld Reducers — Concentric & Eccentric
Concentric and eccentric butt weld reducers to ASME B16.9 in carbon steel, alloy steel and stainless steel, from 1/2 inch to 48 inch.
Butt Weld Tee – Dimensions & Supplier
Equal and reducing butt weld tees to ASME B16.9 in carbon steel, alloy steel and stainless steel, from 1/2 inch to 48 inch.
Butt Weld Elbow (90°/45°, LR/SR) – Dimensions & Supplier
Long radius and short radius 90 degree, 45 degree and 180 degree butt weld elbows to ASME B16.9 in carbon steel, alloy steel and stainless steel, from 1/2 inch to 48 inch.