Pipeline – Mejor Steel

Steel Pipe Bends Supplier – 3D, 5D & Induction Bends

Long radius carbon steel pipe bend with straight tangents

Steel pipe bends in 3D, 5D, 6D to 10D or custom radius, hot induction or cold bent, 1/2 to 48 inch, in carbon steel, 304/316 stainless, API 5L line pipe and P11, P22 and P91 alloy steel.

Carbon Steel Concentric Reducer

Carbon steel concentric reducers for butt-weld piping, ordered to ASTM A234 (typically WPB / WPC; alloy WP grades when specified) with end-to-end length H from ASME B16.9. The cone keeps a common centreline between the large and small ends. Need stainless instead? See the sibling page stainless steel concentric reducer (A403). For concentric vs eccentric … Read more

Stainless Steel Concentric Reducer

Stainless steel concentric reducers for butt-weld piping, ordered to ASTM A403 (WP304 / WP304L / WP316 / WP316L and related WP grades) with end-to-end length H from ASME B16.9. The cone keeps a common centreline between the large and small ends. Eccentric stainless reducers (flat side) are available on the same PO when the layout … Read more

Large Diameter Flange

Large diameter flange on a dark backdrop with many bolt holes and a raised face, a much smaller flange beside it for scale

Large diameter flanges to ASME B16.47, NPS 26 to 60, Class 75 to 900, Series A and Series B, weld neck and blind, forged or cut from plate in carbon, alloy and stainless steel.

Blind Flange / Blanking Flange – Dimensions & Supplier

Blind flange standing on a dark backdrop, closed in the centre with no bore, with a ring of bolt holes and a raised face ring

Blind flanges to ASME B16.5 (NPS 1/2 to 24) and ASME B16.47 (NPS 26 to 60), Class 150 to 2500, forged in carbon, alloy and stainless steel, with a vent or drain tapping on request.

Weld Neck Flange (WNRF) – Dimensions, Class 150/300/600 & Supplier

Weld neck flange on a dark backdrop, showing the long tapered hub, the raised face ring and the ring of bolt holes

Long-hub weld neck flanges to ASME B16.5 (NPS 1/2 to 24) and ASME B16.47 (NPS 26 to 60), Class 150 to 2500, forged in carbon, alloy and stainless steel with raised face, flat face or ring joint facing.

Pipe Flange Supplier – ASME/ANSI B16.5, B16.47 & EN 1092-1

Pipe flanges with a ring of bolt holes and a weld neck, one flange facing the camera

Weld neck, slip on, socket weld, threaded, lap joint and blind flanges to ASME B16.5 and B16.47, class 150 to 2500, in carbon, alloy and stainless steel.

Weld On Pipe Caps – Dimensions & Supplier

Butt weld caps, one turned to show its domed outside and one with the open end toward the camera

Butt weld caps to ASME B16.9 in carbon steel, alloy steel and stainless steel, from 1/2 inch to 48 inch, for closing pipe ends permanently or temporarily.

Butt-Weld Reducers — Concentric & Eccentric

Concentric and eccentric butt weld reducers, one with its small end visibly off centre

Concentric and eccentric butt weld reducers to ASME B16.9 in carbon steel, alloy steel and stainless steel, from 1/2 inch to 48 inch.

Butt Weld Tee – Dimensions & Supplier

Butt weld tee with three openings and a smooth forged surface, the branch facing upward

Equal and reducing butt weld tees to ASME B16.9 in carbon steel, alloy steel and stainless steel, from 1/2 inch to 48 inch.

WhatsApp