Standard: API 11B

Sucker Rod Guide

Sucker rod guide with a ring of small rollers around a rod

Sucker rod guides and centralizers in wheeled, fluted and snap-on designs to reduce rod and tubing wear in deviated and horizontal wells.

Pumping Tee

Pumping tee with a vertical run and a side outlet with flanged ends, loose bolts alongside

Pumping tees for rod pumping wellheads, allowing the polished rod to pass through while providing outlets for production and casing gas.

Stuffing Box

Stuffing box with a packing nut, a cylindrical barrel and a polished rod passing through the bore

Wellhead stuffing boxes for rod pumping wells, sealing between the polished rod and the wellhead, in standard and high pressure designs.

Polished Rod Clamp

Polished rod clamp in two halves held by four bolts with a bore through the centre

Polished rod clamps to grip the polished rod and carry the rod string load from the pumping unit, in sizes from 3/4 inch to 1-1/2 inch.

Sinker Bar

Sinker bars noticeably heavier in section than a sucker rod, with upset threaded ends

Sinker bars placed above the pump to add weight and keep the rod string in tension, in sizes from 3/4 inch to 1-1/2 inch and lengths up to 25 ft.

Pony Rod

Short pony rods with a coupling at one end and a pin thread at the other

Pony rods from 2 ft to 12 ft for adjusting sucker rod string length, in the same grades and sizes as standard sucker rods, with couplings.

Sucker Rod Coupling

Sucker rod couplings with cylindrical bodies, two flat wrench faces and internal threads

Sucker rod couplings to API 11B in class T and class SM, full size and slim hole, for sizes from 5/8 inch to 1-1/4 inch.

Polished Rod

Polished sucker rod with a bright chromium-plated body and wrench flats at the upset end

Polished rods for beam pumping units, machined and ground to a mirror finish, in sizes from 3/4 inch to 1-1/2 inch, with a top and bottom end connection.

API 11B Sucker Rod

API 11B sucker rods with forged upset ends and square shoulders gathered at one end

Steel sucker rods to API 11B in grades C, D, K, KD, HL and HY, sizes from 5/8 inch to 1-1/4 inch, in 25 ft standard length, with forged upset ends and rolled threads.

WhatsApp