Preparing a swage enquiry? Use the existing copy-paste RFQ and end-code checklist. Quick answer. A swage nipple (also “swage”, “swaged nipple” or “swage concentric reducer”) is a one-piece male-ended reducing fitting forged down from pipe or bar. Dimensions are set by MSS SP-95, which covers NPS 1/8 through NPS 12, concentric and eccentric types, with … Read more
Quick answer. “Socket weld reducer” means one of two different forged parts, and suppliers mix them up: Socket-weld reducer insert Socket-weld reducing coupling Shape Male shank (pipe OD) on the large end, female socket on the small end Female socket on both ends Goes into The socket of another fitting (tee, elbow, coupling) Between two … Read more
Large diameter flanges to ASME B16.47, NPS 26 to 60, Class 75 to 900, Series A and Series B, weld neck and blind, forged or cut from plate in carbon, alloy and stainless steel.
Lap joint flanges to ASME B16.5 used with ASME B16.9 stub ends – the flange is free to rotate for bolt hole alignment and only the stub end touches the fluid.
Small bore threaded flanges to ASME B16.5 with ASME B1.20.1 NPT threads, forged in carbon, alloy and stainless steel for lines where welding is not permitted.
Small bore socket weld flanges to ASME B16.5, forged in carbon, alloy and stainless steel for instrument, utility and small bore high pressure lines.
Blind flanges to ASME B16.5 (NPS 1/2 to 24) and ASME B16.47 (NPS 26 to 60), Class 150 to 2500, forged in carbon, alloy and stainless steel, with a vent or drain tapping on request.
Slip on flanges to ASME B16.5 (NPS 1/2 to 24), Class 150 to 1500 (Class 1500 only to NPS 2 1/2; no Class 2500 slip-on), forged in carbon, alloy and stainless steel and fillet welded on both sides.
Long-hub weld neck flanges to ASME B16.5 (NPS 1/2 to 24) and ASME B16.47 (NPS 26 to 60), Class 150 to 2500, forged in carbon, alloy and stainless steel with raised face, flat face or ring joint facing.
Pumping tees for rod pumping wellheads, allowing the polished rod to pass through while providing outlets for production and casing gas.